NEWS CENTER
18
2023
-
01
Where is the car air conditioning filter? How to replace the air conditioning filter element, how to remove the car air conditioning filter
Source:
internet
The position of the air conditioning filter element varies from vehicle model to vehicle model. There are two main positions: 1. Part of the air conditioning filter element is under the front windshield of the vehicle and is covered by the water diversion channel; 2. Most of the air conditioning filter element is located in front of the passenger seat, generally under the left side.
The position of the air conditioning filter element is different for different models, mainly in two positions:
1. Part of it is under the front windshield of the vehicle and is covered by the water diversion channel,
2. Most of the A/C filter elements are located in front of the passenger seat, generally under the left side.
How to replace the air conditioning filter element? There are two methods:
I:
1. Open the engine cover and find the plastic plate on the air conditioning filter element
2. Unscrew the screws on the plastic plate, then tear off a piece of plastic strip in front of the plastic plate, and then take down the plastic plate to find the filter element;
3. There is a buckle on both sides of the air conditioning filter element. Open the buckle outwards and pull out the air conditioning filter element lattice;
4. Replace it with a new one, align the filter element lattice and install it back;
5. Put the air conditioning filter element grid back in place, fasten the clip, cover the plastic cover plate, tighten the screw, and then install the rubber strip to complete the replacement.
II
1. Open the glove box to the fixed position, remove the fixed clip, press both sides of the glove box to the middle with both hands, and remove the glove box
2. Open the air filter cover of the air conditioner and pull out the air filter element of the air conditioner;
3. Replace the air conditioning filter element with a new one. If the air conditioning filter element is not very dirty, it can be cleaned and used again
4. Install the components in the reverse order of disassembly, replace the cover plate, install the glove box, and buckle up.
On-board air conditioner,filter element